Wireless

Brief DescriptionThe ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to ...

Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, s...

DescriptionRing, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module th...

Digi XBee 802.15.4 modules are the easiest-to-use, most reliable and cost-effective RF devices we’ve experienced. The 802.15.4 XBee modules provide...

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but...

The Bluefruit LE UART Friend makes it easy to add Bluetooth Low Energy connectivity to anything with a hardware or software serial port. We even ha...

Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gai...

This is a breakout board from SparkFun for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also capabl...

While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don't have an...

Passive GPS Antenna uFL - 15mm x 15mm 1 dBi gain

Bluefruit LE - Bluetooth Low Energy (BLE 4.0) - nRF8001 Breakout

This adapter board is designed to make adding wireless point-to-point or mesh networking easy. I looked at all the XBee adapter boards available an...

This low cost XBee USB Adapter Board comes in partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcontr...

S50 chip specification: 1 KiloByte (8 KiloBit) non-volatile EEPROM storage Built in encryption engine with 48-bit key 4 Byte unique identi...

This is a blank 13.56MHz RFID/NFC card - often used for train/bus passes but also found in other systems where a proximity card is desired. The tag...

DescriptionCellular + GPS tracking, all in one? Oh yes! Introducing Adafruit FONA 808 MiniGSM + GPS, an all-in-one cellular phone module with that ...

IR Remote Control - tinkerKit

The CC3000 hits that sweet spot of usability, price and capability. It uses SPI for communication (not UART!) so you can push data as fast as you w...

Introduction Bluetooth transmission module can enable you to get rid of using cable for a serial port device and realize wireless serial communica...

NRF24L01 2.4GHz Wireless Transceiver for Arduino

Cellular + GPS tracking, all in one, for your Arduino? Oh yes! Introducing Adafruit FONA 808 GSM + GPS Shield, an all-in-one cellular phone module ...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi

2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi

This tiny micro NFC/RFID tag is super small, and contains an NTAG203 chip plus antenna. It's super tiny, flexible and a great way to DIY an RFID or...

Build your own cellular project and get off the grid with FONA. This pack comes with an SMA-antenna type FONA and paired with hand-picked accessori...

Keyestudio HC-08 Bluetooth module is a new digital transmission module, based on the Bluetooth Specification V4.0 BLE Bluetooth protocol.Its wirele...

IntroductionThis Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz IS...

Dynamic NFC Tag