Vibrating Mini Motor Disc (Vibe Motor)
Vibrating Mini Motor Disc (Vibe Motor)

Vibrating Mini Motor Disc (Vibe Motor)

0.950 KD

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed.

Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.

If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series.


TECHNICAL DETAILS

  • Dimension: 10mm diameter, 2.7mm thick
  • Voltage: 2V - 5V
  • 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
  • 11000 RPM at 5V
  • Weight: 0.9 gram


Related products

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
Sold out
6.500 KD

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The ...

View full details
DC Toy / Hobby Motor
1.000 KD

DC Toy / Hobby Motor

This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available...

View full details
Stepper Motor - NEMA-17: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
6.500 KD

Stepper Motor - NEMA-17: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holdi...

View full details
VNH5019 Motor Driver Carrier
14.000 KD

VNH5019 Motor Driver Carrier

This module is a compact breakout board for ST’s high-power VNH5019 motor driver IC, a fully integrated H-bridge that can be used for bidirectional...

View full details
Hobby Gearmotor - 200 RPM (Pair)
Sold out
1.250 KD

Hobby Gearmotor - 200 RPM (Pair)

Hobby Gearmotor - 200 RPM (Pair)