Electronics

D24V5Fx regulator family overviewThese buck (step-down) voltage regulators generate lower output voltages from input voltages as high as 36 V. They...

555 Timer Chip

10uF Capacitor Radial

0.33uF Ceramic Capacitor

0.1uF Capacitor

DRV8825 Stepper Motor Driver with Heat Sink

Specifications Capacitance: 330 uF Maximum Voltage: 35 V Height: 0.63" (16 mm) Diameter: 0.4" (10 mm) Lead Spacing: 0.2" (5 mm)

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chi...

N-Channel MOSFET 60V 30A

DescriptionCellular + GPS tracking, all in one? Oh yes! Introducing Adafruit FONA 808 MiniGSM + GPS, an all-in-one cellular phone module with that ...

DescriptionThis is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprog...

3-pin Terminal Block - 3.5mm

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the 2"-long lever arm makes it especially...

Screw Terminals 2.54mm Pitch (2-Pin)

PICKit 3 Programmer

Pack of 10 Resistors 47K ohm 1/4W 5%

Pack of 10 Resistors 22K ohm 1/4W 5%

470uF 20% 50V Radial Capacitor

Pack of 10 Resistors 1.8K ohm 1/4W 5%

Pack of 10 Resistors 1.2K ohm 1/4W 5%

Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy t...

Blue LED 3mm

IC OPAMP GP 1.5MHZ 8DIP

Green LED 3mm

0.1uF (104) Ceramic Capacitor

D24V5Fx regulator family overviewThese buck (step-down) voltage regulators generate lower output voltages from input voltages as high as 36 V. They...

22uF Ceramic Capacitor

10% 50VDC

20% 50V

20% 50V

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 6mm (+/- 0.3mm) sha...

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you...

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it ...

5x RED5x YELLOW5x BLUE5x GREEN

keyestudio PRO MICRO is a microcontroller board based on the ATMEGA32U4-MU. It is an easy-to-use open source hardware.It has 18 digital input/outpu...

keyestudio GUVA-S12SD 3528 Ultraviolet Sensor is used to detect ultraviolet light. It includes GUVA-S12SD, applied to measure ultraviolet index of ...