Your shopping cart is empty or products are not available any more.
0 reviews / Write a review
This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. The cable’s connectors are commonly found on RC servoleads and work with both male JR and male Futaba J connectors. They have gold-flashed contacts on a 0.1" spacing and are joined by 22-AWG, 60-strand wires that make this cable more flexible than standard servo cables.
Note: The cable’s female connectors are the same as what is found on most generic servos and fits nicely with 0.1" male headers, but is often referred to as “male” in the RC hobby industry. The picture below shows the cable connectors labeled with our gender convention.
Female “JR”-style connector commonly found on servo cables (often referred to as “male” in the RC hobby industry).
These female-to-female cables are available in two styles: flat, with wires stuck together side by side, and twisted, with wires twisted around each other to decrease electromagnetic interference (EMI). The twisted versions are especially soft and flexible. These cables are also available in three lengths: 6", 12", and 24".
12" (300 mm) female-female RC servo extension cable.
Twisted servo extension cable 12" female – female.
We also sell flat and twisted male-to-female servo extension cables.
Servo cable color convention
brown or black = ground (GND, battery negative terminal)
red = servo power (Vservo, battery positive terminal)
orange, yellow, white, or blue = servo control signal line
Solderless breadboards are commonly used for prototyping because they allow you to quickly build tem..
Breakaway header is like the duct tape of electronics. Its great for connecting things together, sol..
This convenient 1.3mm DC to 2.1mm DC adapter cable lets you plug one of our solar panels into our op..
This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that mates wit..
Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy fo..
The Arduino Mini USB Adapter is a breakout board for the FT232RL chip from FTDI (drivers are include..
Bare Conductive Paint is a multipurpose electrically conductive material perfect for all of your DIY..
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, et..
CP2104 USB-to-serial adapter carrier, bottom view with dimensions.
This USB-to-serial adapt..
These premium jumper wires are great for making quick and easy prototyping connections. The pack inc..
Pins: 1 x 40
Spacing: 0.100 in
Pin type: str..
This 3-wire harness can be used to add a toggle switch between any two devices that can be connected..
Connect this to that without soldering using these handy mini alligator clip test leads. 5" overall ..
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables ..
This servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR ..
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial con..
This RF adapter cable is super handy for anyone doing RF work. Often
times, small electronics save..
This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and conn..
Specifications: 400 Tie point..
Description: This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These..
Description: If you need to knock up a quick prototype there’s nothing like having a pile of ju..
These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for u..
The jumpers in this bundles are of 3 different sizes. In this bundle there are: &nb..
Pretty Standard copper-strip board for prototyping and general circuit soldering. 30 Lines with 48 h..
These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies..
These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblie..
Simple shrouded 6-pin connector. Good for preventing cable connection mishaps. Use for programming, ..
Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming,..
Ribbon cable is really helpful in situations where you need to make a lot of connections without a b..
Enter your Email and you will be notified once item will be again available.
We ship to the GCC and MENA regions.
Reliable and fast shipping to your door, quality assured.
Find us on Instagram
Just type @idea_link