Your shopping cart is empty or products are not available any more.
0 reviews / Write a review
A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your audio from clipping or distorting.
If you don't want to use I2C to control it, it does start up on with 6dB gain by default and the AGC set up for most music playing. We do suggest using it with a microcontroller to configure it, however, since its quite powerful. Settings are not stored in the chip, so you'll need to adjust any gain & AGC amplification settings every time the amp is powered up.
Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when driving an 8Ω speaker at 1.5 Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell if it got hot. This board is a welcome upgrade to basic "LM386" amps!
The inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to ground. The outputs are "Bridge Tied" - that means they connect directly to the outputs, no connection to ground. The output is a ~300KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly.
Comes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include 3.5mm screw-terminal blocks so you can easily attach/detach your speakers, and some header in case you want to plug it into a breadboard. Speakers are not included, use any 4 ohm or 8 ohm impedance speakers.
..
KWD 1.00 KWD 1.00
UNTIL NOW! Don't get me wrong, I love the MP3 Music Maker shield, and our Wave Shield is a dependab..
KWD 8.75 KWD 8.75
This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the..
KWD 2.25 KWD 2.25
Add an ear to your project with this well-designed electret microphone amplifier with AGC. This full..
KWD 3.50 KWD 3.50
Features: Small Size Power rating: 0.5W Impedance: 8 ohm ..
KWD 1.25 KWD 1.25
Technical Details Weight: 50.48g Dimensions: 77.8mm x 77.8mm x 25.49 / 3.06" x 3.06" x 1" ..
KWD 1.50 KWD 1.50
It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sort..
KWD 9.75 KWD 9.75
That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is p..
DescriptionWould you like to add audio/sound effects to your next project, without an Arduino+Sh..
KWD 6.50 KWD 6.50
DescriptionThis incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x..
KWD 4.00 KWD 4.00
If you want to get some sound out of your project but have a tight space budget, this is a good wa..
KWD 0.45 KWD 0.45
KWD 0.50 KWD 0.50
Enter your Email and you will be notified once item will be again available.
We ship to the GCC and MENA regions.
Reliable and fast shipping to your door, quality assured.
Find us on Instagram
Just type @idea_link