Your shopping cart is empty or products are not available any more.
0 reviews / Write a review
New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output
We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS breakout board. We believe this is the Ultimate GPS module, so we named it that. It's got everything you want and more:
-165 dBm sensitivity, 10 Hz updates, 66 channels
5V friendly design and only 20mA current draw
Breadboard friendly + two mounting holes
PPS output on fix
We have received reports that it works up to ~32Km altitude (the GPS theoretically does not have a limit until 40Km)
Internal patch antenna + u.FL connector for external active antenna
Fix status LED
The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation.
Best of all, we added all the extra goodies you could ever want: a ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on.
Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can snap on any 3V active GPS antenna via the uFL connector. The module will automatically detect the active antenna and switch over! Most GPS antennas use SMA connectors so you may want to pick up one of our uFL to SMA adapters.
The other cool feature of the new MTK3339-based module (which we have tested with great success) is the built in datalogging ability. Since there is a microcontroller inside the module, with some empty FLASH memory, the newest firmware now allows sending commands to do internal logging to that FLASH. The only thing is that you do need to have a microcontroller send the "Start Logging" command. However, after that message is sent, the microcontroller can go to sleep and does not need to wake up to talk to the GPS anymore to reduce power consumption. The time, date, longitude, latitude, and height is logged every 15 seconds and only when there is a fix. The internal FLASH can store about 16 hours of data, it will automatically append data so you don't have to worry about accidentally losing data if power is lost. It is not possible to change what is logged and how often, as its hardcoded into the module but we found that this arrangement covers many of the most common GPS datalogging requirements.
We've received reports from customers that have tested this version of the Ultimate GPS module in a high-altitude balloon, and it kept fix up to ~32km! There is a (theoretical, untested) firmware limit of 40Km. However, we provide no guarantee that it will work in all HAB's.
Note: This sensor needs a 4.7K ohm pull-up resistor. Make sure you have one in hand...
Description: This basic piezo sensor from Measurement Specialties is often used for flex, touch..
This pressure transducer has a range of 0 - 10000 PSI (1723.69 kPa) and an a..
This pressure transducer has a range of 0 - 500 PSI (1723.69 kPa) and an accuracy..
We've now got a wider range version of favorite triple-axis accelerometer - it even has an on-board ..
These spring-vibration switches are high sensitivity non-directional vibration induced trigger swit..
Triple-axis analog accelerometer - for measuring motion and tilt
Force sensitive r..
The QTR-3RC reflectance sensor array is intended as a line sensor, but it ca..
Pulse Sensor Amped adds amplification and noise cancellation circuitry to the hardware. It's noticea..
Operating voltage: 2.7 V to 6.2 VAverage current consumption: 5 mA (typical)Output ty..
The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to ..
Runs on 5V-16V power (if you need to run it off of 3V you can do that by bypassing the regulator, bu..
Detects a wide range of colors and outputs data as 10-bit RGB (Red/Green/Blue) componen..
This set includes sensor boards and reflective wheels to add quadrature encoding to two mic..
This compact sonar range finder by Maxbotix detects objects from 0 to 6.45 m (21.2 ft) wit..
Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator ..
These pressures can easily be converted to altitudes. The board has a 3.3 V linear regulator and int..
This board is a compact (0.4″ × 0.9″) breakout board for ST’s L3GD20H three-axis digital-output gyro..
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Hand..
The Sensor Film Kit is a great new way to make custom-sized sensors out of force sensitive material...
These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work ..
This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement o..
The pre-programmed Touch Board is Arduino-at-Heart, so your Arduino shields and code will work seeml..
Decode nearly any kind of 1D (striped) barcode in your project using this adorable compact barcode s..
An anemometer is a device used for measuring wind speed, and is a common weather station instrument...
This GPS shield works great with either UNO or Leonardo Arduinos and is designed to log data to an S..
It's summer and you're sweating and your hair's all frizzy and all you really want to know is why th..
This current sensor is a carrier board or breakout board for Allegro’s ACS711KLCTR-25AB-T Hall effec..
This current sensor is a carrier board or breakout board for Allegro’s ACS711KLCTR-12AB-T Hall effec..
This current sensor is a carrier board or breakout board for Allegro’s ACS709LLFTR-35BB-T..
The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the l..
Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance acros..
Take your project portable with the included battery pack and stitch it into a final design with con..
The Leap Motion Controller is a fascinating new computer sensor that uses multiple cameras and IR li..
This board is a compact (0.5″ × 0.9″) breakout board for ST’s L3GD20 three-axis digital-ou..
This board is a compact (0.4″ × 0.9″) breakout board for ST’s LSM6DS33 inertial module, which featur..
Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to..
The Sharp distance sensors are a popular choice for many projects that require accurate di..
Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, d..
This force-sensing resistor (FSR) from Interlink Electronics is a passive component that acts as a v..
This sensor can detect flexing or bending in one direction. They were popularized by being used in t..
These sensors are easy to use, they are basically resistors that change value based on how much thei..
This flammable gas and smoke sensor detects the concentrations of combustible gas in the a..
This methane gas sensor detects the concentration of methane gas in the air and ouputs its ..
It is designed to be submersible in water, but it's always best to avoid long-term (over 1 hour at ..
This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the o..
The Pixy CMUCam 5 is an image sensor with a powerful processor that you can program to only send the..
The QTR-3A reflectance sensor array is intended as a line sensor, but it can ..
Operating Voltage: 2.5 V to 5.5 V
Carrier Frequency: 38 kHz
The X-Band Motion Detector operates in the X-band frequency, at 10.525 GHz and indicates detected mo..
These spring-vibration switches are high sensitivity non-directional vibration induced trigger switc..
The "poor man's" accelerometer/motion sensor! These spring-vibration switches are medium sensitivity..
For specific temperature-to-resistance, check the lookup table.
These are often ..
This is a bare wires bead-probe which can measure air or surface temperatures. Most inexpensive the..
The AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital..
Wide range, low power temperature sensor outputs an analog voltage that is proportional to the ambie..
DescriptionThe eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies..
Description: The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture ..
Description: Piezo elements come in handy when you need to detect vibration or a knock. You can..
Feature:1.Working Voltage : 5V(DC)2.Static current: Less than 2mA..
Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance acros..
This allows a microcontroller with an analog-to-digital converter (ADC), such as an Arduino&nbs..
This breakout board will solve all your current-monitoring problems. Instead of struggling with a mu..
Kit Listing:White LED Module * 1RGB LED Module *13W LED Module &n..
keyestudio XD-58C pulse sensor module is used to measure heart rates. It’s widely applied for studen..
Our water sensor is easy- to-use, portable and cost-effective, it is designed to identify and detect..
keyestudio GUVA-S12SD 3528 Ultraviolet Sensor is used to detect ultraviolet light. It includes GUVA-..
This sensor adopts TCS3200 programmable color light-to-frequency converter, it can be applied to col..
The AD8232 is an integrated front end for signal conditioning of cardiac bioelectrical signals to mo..
This cyber-tronic looking sensor hides a secret behind its glimmering eye. Unlike most temperature s..
1: Digital White LED Light Module project2: Piranha LED Light Module3: 3W LED Module4: RGB LED modul..
Enter your Email and you will be notified once item will be again available.
We ship to the GCC and MENA regions.
Reliable and fast shipping to your door, quality assured.
Find us on Instagram
Just type @idea_link