Your shopping cart is empty or products are not available any more.
0 reviews / Write a review
The ELEV-8 Quadcopter is a flying robotic platform that is lifted and propelled by four fixed rotors. There are no fixed wings; all of the lift is created from the rotors. Unlike standard helicopters, the quadcopter uses fixed-pitch blades, whose rotor pitch does not vary as the blades rotate; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.
Aircraft stabilization is electronically controlled by the HoverFly board with Parallax's Propeller multicore microprocessor. The benefit to this system is a stable platform with no mechanical linkages, for a small, maneuverable, and agile aircraft.
This kit provides a durable way to get involved in the advanced quadcopter arena. The kit includes; frame, mounting hardware, motors, speed controllers, propellers and the control board for flight stabilization (the only thing you need to provide is the RC radio equipment and a battery). We recommend a six channel RC radio.
The ELEV-8 platform is large enough for outdoor flight and has plenty of room for payload and attachments (up to 2 lbs).
NOTE: This kit is not for beginners, it requires a moderate amount of mechanical skill to build and fly. The ELEV-8 quadcopter kit requires an average of 8 hours to assemble; RC experience is highly recommended.
Open underbody for accessory and camera mounting
Open source design files are available for you to download and use
Modular frame allows for fast repairs and swapping of parts
High strength chassis keeps your electronic components safe and protected
Uses common 4-40 hardware that can be found at most local hardware stores
2 pound payload capacity
Land mapping and surveying
Light weight of 2.5 lbs fully assembled (without battery)
2 - Gem Fan 10x4.5 Composite Propellers
2 - Gem Fan Composite Pusher Propellers
4 - Gem Fan Plush mount 30A ESCs
4 - Gem Fan A2212-13 1000kv motors
4 - Anodized 6061 5/8" - .035 aluminum round tube
Dimensions: 18 3/8" (467 mm) motor center to motor center -- 20 1/4" X 20 1/4" (514 mm) -- Main body/frame 7" X 7" (177 mm) -- Height 7" (177 mm)
For details and documentation, please visit the manufacturars site: https://www.parallax.com/product/80000
DISCLAIMER OF LIABILITY: Idea Link is not responsible for any direct, indirect, special, or consequential damages and personal injuries, including that to life, and health, resulting from the customer’s application and use of these Parallax Inc. products. You, the customer, assume full and unlimited responsibility for all customer ELEV-8 multicopter applications and uses.
1: Digital White LED Light Module project2: Piranha LED Light Module3: 3W LED Module4: RGB LED modul..
OWI’s second-generation robotic arm kit, the Robotic Arm Edge, teaches the basic mechanics and elect..
KWD 27.75 KWD 23.00
The S2 robot is suitable for a wide range of programming skills. The Scribbler robot arrives pre-pro..
KWD 45.00 KWD 38.00
The Sensor Film Kit is a great new way to make custom-sized sensors out of force sensitive material...
Take your project portable with the included battery pack and stitch it into a final design with con..
Triple-axis analog accelerometer - for measuring motion and tilt
Force sensitive r..
Using the MaKey MaKey you can make anything into a key (get it?) just by connecting a few alligator ..
KWD 27.50 KWD 22.00
The Leap Motion Controller is a fascinating new computer sensor that uses multiple cameras and IR li..
Want to make your own inventions? Learn circuit-building and programming at the same time with the B..
Harnessing the power of the 8-core Propeller microcontroller is now easier than ever before. The bui..
The Boe-Bot Robot takes about 1-2 hours to put together. Each project in the Robotics text provide..
KWD 49.00 KWD 44.00
Introduction Arduino super learning kit walks you through the basics of ..
Introduction Keyestudio Arduino super learning kit MEGA is suitable for Arduino enthusiasts. Th..
Kit Listing:White LED Module * 1RGB LED Module *13W LED Module &n..
The IR holder frame of IdeaBot. It allows SparkFun RedBot Sensor - Line Follower to be attached at e..
Educational robot by Parallax. Learn more from Parallax here!
KWD 49.00 KWD 45.00
In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 wit..
This ball caster kit includes a black ABS housing, a 3/4" diameter metal ball, two spacers..
This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two space..
This ball caster kit includes a black ABS housing, a 1" diameter plastic ball, three dowel..
The Solarbotics SW wheel is compatible with standard Futaba servo hubs such as those on the SpringR..
The Tamiya 70144 ball caster from Tamiya’s educational construction series is a small steel ball tha..
IdeaBot is an Arduino based educational robot kit that is designed to give you the best and easiest ..
Introduction Learn Arduino with Idealink StartUP! shield. StartUP! shield provides the fastest, most..
Description:The bare minimum moving platform that IdeaBot uses. The module includes the following:&n..
The scriber holder of Ideabot. This product includes: 1) Scriber Frame ..
Grab and place objects with this gripper assembly from Ideabot. This product includes: &n..
The eyes of Ideabot. This basic assembly includes: 1) Sonar Holder Frame &nbs..
Fit onto the 3mm D shafts of Pololu's Mini/Micro Metal and 120:1 Mini Plastic GearmotorComes with si..
These ABS tracks work with a variety of injection-molded sprocket sets, making it easy to build a tr..
Brief DescriptionThe ESP8266 WiFi Module is a self contained SOC with integrated
TCP/IP protocol s..
KWD 4.00 KWD 2.50
Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cig..
KWD 13.00 KWD 11.00
A solid state relay (SSR) allows you to control high-curent AC loads from lower voltage DC control ..
KWD 4.75 KWD 3.75
he HD-3001HB is a great general-purpose, standard-size servo. Two ball bearings help reduce friction..
KWD 5.00 KWD 4.00
KWD 3.00 KWD 2.50
Add a mini printer to any microcontroller project with this very cute thermal printer. Thermal print..
KWD 16.75 KWD 15.50
KWD 0.75 KWD 0.45
For a long time we’ve had small 7-segment displays and huge 7-segm..
KWD 1.50 KWD 1.00
KWD 6.00 KWD 4.50
KWD 21.00 KWD 18.00
The AR-3606HB is a standard-sized servo that has been built by Power
HD specifically for..
KWD 5.25 KWD 4.50
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings hel..
KWD 4.50 KWD 3.50
Description: Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit desig..
KWD 9.75 KWD 6.75
This 16-character, 2-line parallel liquid crystal display achieves a large viewing area in a compact..
KWD 3.75 KWD 2.75
This 20-character, 4-line parallel liquid crystal display provides a large viewing area. It features..
KWD 4.95 KWD 3.25
Brief DescriptionThe ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol sta..
KWD 7.00 KWD 4.50
Feather is the new development board from Adafruit, and like its
namesake it is thin, light, and l..
KWD 9.50 KWD 7.00
While this chip has been very popular, its also been very difficult to use. Most of the low cost mod..
KWD 8.75 KWD 7.00
KWD 0.75 KWD 0.50
Adafruit Raspberry Pi 2 or B+ Case - Smoke Base / Clear TopAdafruit Assembled Pi Cobbler PlusFull S..
KWD 30.00 KWD 22.00
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). E..
KWD 6.50 KWD 5.00
Enter your Email and you will be notified once item will be again available.
We ship to the GCC and MENA regions.
Reliable and fast shipping to your door, quality assured.
Find us on Instagram
Just type @idea_link