Your shopping cart is empty or products are not available any more.
0 reviews / Write a review
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it. Or you can breadboard something on your own!
Each chip contains two full H-bridges (four half H-bridges). That means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver
There's a PWM input per driver so you can control motor speed. Runs at 5V logic. Good for motor voltages from 4.5V up to 36V! This wont work well for 3V motors. The motor voltage is separate from the logic voltage.
This gearmotor is a powerful brushed DC motor with 131.25:1 metal gearbox intended for ope..
Description: Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just t..
This module is a compact breakout board for ST’s high-power VNH5019 motor driver IC, a fully integra..
wo wires are used to control/power the vibe. Simply provide power from a battery or microcontroller ..
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using ..
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step fo..
Power requirements: 4 to 6 VDC* , 15 -200 mA
Communication: Pulse-width modulation
The Micro Maestro is the smallest of Pololu’s second-generation USB servo controllers. The Maestros ..
Texas Instruments’ DRV8835 is a tiny dual H-bridge motor driver IC that can be used for bidirectiona..
This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino wher..
These are perhaps better known as "the drivers in our assembled Adafruit Motorshield or Motor HAT." ..
You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a l..
Like our original carrier, the Black Edition offers adjustable current limiting, over-current and ov..
This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Dr..
Bring in some muscle to your output pins with 8 mighty Darlingtons! This DIP chip contains 8 drivers..
These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—..
These small brushed DC gearmotors can deliver a lot of power for their size. This version has a ..
Voltage: 12VNo-Load performance: 10,000 RPM, 150mAStall extrapolation: 0.5kg.cm, 5.5A..
The AR-3606HB is a standard-sized servo that has been built by Power
HD specifically for c..
The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor..
The Mini Maestros are highly versatile (and compact) servo controllers and general-purpose I/O board..
The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with ou..
Good for beginners who want to make stuff move without building a motor controller with feedback & g..
Add more power to your robot with this metal-geared servo. The tiny little servo can rotate approxim..
he HD-3001HB is a great general-purpose, standard-size servo. Two ball bearings help reduce friction..
Comes with one mount and a bag of hardware for attachment:
4 x 34mm long M4 Pan head
4 x M4 ..
The FS5103B is a general-purpose standard-size analog servo from FEETECH. The output shaft is suppor..
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 i..
The HD-1235MG is a giant-scale (also called 1/4-scale or mega-scale) digital servo from Power HD tha..
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar ..
This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 V to 28&n..
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of mo..
Motor length: 76.4 mmHolding torque: 1.5 N.mAmps: 5.8 ARotor inertia: 380 g.cmMotor weight: 1.1 kgSh..
Model: DHBQ3078APhase number: 3-phaseInput: DC 24-80VCurrent: 2.5-6A..
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life ca..
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating ..
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 ..
Enter your Email and you will be notified once item will be again available.
We ship to the GCC and MENA regions.
Reliable and fast shipping to your door, quality assured.
Find us on Instagram
Just type @idea_link